User's Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-26 User’s Guide
9. Switch the functions of either side of the link (set the transmit unit
to receive and the receive unit to transmit) and repeat the procedure
to check the link from the opposite direction.
3.6.6. Using the Rx Packets per Frequency Histogram
Use the Display Rx Packets per Frequency option to see a histogram of the
number of frames received on each channel.
BreezeNET PRO.11 Series (AP-10)
Version : 4.3.10
Date: 15 Feb 1999 23:49:56
Max = 187
Min = 112
#
# # # # #
# # #### ### # # # # # ## # ## # # ## #
# ## ## # ## ######## ###### # ######## # ### ## # ## # # ## # ##
####### ## ######################################################### ########
#############################################################################
^ ^ ^ ^ ^ ^ ^ ^
2 +10 +20 +30 +40 +50 +60 +70
Hit any key to return >
Figure 3.8: Display Rx Packets per Frequency
Each point of the histogram line corresponds to a frequency. The base
frequency appears at the far left, and gradations are marked in steps of ten
along the line. A hash represents each packet received on a given frequency
(#). The Max and Min values indicate the highest and lowest number of
frames received across all frequencies. This graph is very useful for tracking