User's Manual

BreezeNET PRO.11 Series 3-28 User’s Guide
advanced settings. Access is password-protected. After
configuration, the installer should change access rights to option (0),
User. The installer can also change the installer password (see next
parameter).
• Technician – Only a Certified BreezeCOM Engineer possessing the
correct password can select this option to configure all the
parameters and settings.
• Change Installer Password – Type in the new password according to
the directions on screen. This screen changes the installer password to
prevent unauthorized persons from making any changes in system
configuration and setup. The password is limited to eight printable
ASCII characters. This option is not available at User level.
• Show Current Access Right – This read-only screen presents the
current access right configuration.
Important: If you change the Installer password do not forget it, or you will be
unable to change the unit's access rights.