User's Manual

Planning and Installing Wireless LANs
BreezeNET PRO.11 Series 4-4 User’s Guide
The remote units should use directional antennas aimed in the direction of
the AP’s antenna(s).
4.1.1.3 Mobile Applications
In mobile applications, station orientation changes continuously. In order to
maintain connectivity throughout the entire coverage area, most mobile
applications require omni-directional antennas for both Access Points and
wireless stations. In a motor vehicle, for example, you can install an SA-10
in the cabin, and mount the antennas on the roof.
4.1.1.4 Extending the LAN with WLAN Bridging
The figures below demonstrate how the WB-10 can be used to extend a
regular network with a wireless link.
Disclaimer: This diagram is for illustrative purposes only. It should not be
confused with the transceiver operating in a standalone mode. When this
diagram is in use, the transceiver will be used in conjunction with amp
model
AMP-2440-250/500 and the antennas listed in this manual.
Figure 5.1: Connecting Remote Offices to Main Office Network