User Manual

Chapter 3 - Operation and Administration of the Macro BTS Monitoring HW and SW Components
4Motion 664 System Manual
3.11.1.4 Displaying Utilization of CPU and Memory Resources for the
NPU
To display the utilization of CPU and memory resources for the NPU, run the
following command:
npu# show resource usage
After you run this command, the current CPU and memory usage is displayed.
Privilege
Level
1
Display
Format
Current shelf temperature: <value> [Celsius] / <value> [Farenheit]
Command
Modes
Global command mode
NOTE
For more information about setting thresholds for CPU and memory usage, refer to “Displaying
CPU and Memory Utilization Limits for the NPU” on page 173
.
Command
Syntax
npu# show resource usage
Privilege
Level
1
Display
Format
Resource Usage[in %]
CPU <value>
Memory 7<value>
Command
Modes
Global command mode