User Manual

Chapter 4 - Operation and Administration of the Micro BTS BS Menu
4Motion 714 System Manual
 ctcQamSixteenOneOverTwo 16-QAM 1/2
 ctcQamSixteenThreeOverFour (16-QAM 3/4)
 ctcQamSixtyFourOneOverTwo (64-QAM 1/2)
 ctcQamSixtyFourTwoOverThree (64-QAM 2/3)
 ctcQamSixtyFourThreeOverFour (64-QAM 3/4)
 ctcQamSixtyFourFiveOverSix 64-QAM 5/6
The default is ctcQpskOneOverTwo (QPSK 1/2).
4.7.2.2.1.2 UL Permutation Base
The permutation base used in the uplink data zone.
The valid range is from 0 to 69.
4.7.2.2.2 Downlink Data Zone
The Downlink Data Zone menu enables viewing/updating the values configured
for the following parameters:
 “Basic Rate for Management”
 “Basic Rate for Data”
 “DL Permutation Base”
4.7.2.2.2.1 Basic Rate for Management
The downlink basic rate for unicast and broadcast management:
 ctcQpskOneOverTwoTimesSix (QPSK 1/2 Repetition 6)
 ctcQpskOneOverTwoTimesFour (QPSK 1/2 Repetition 4)
 ctcQpskOneOverTwoTimesTwo (QPSK 1/2 Repetition 2)
 ctcQpskOneOverTwo (QPSK 1/2)
 ctcQpskThreeOverFour (QPSK 3/4)
 ctcQamSixteenOneOverTwo 16-QAM 1/2