User's Manual
For further information, please contact Alvarion Technical Support at: support@alvarion.com 
Page | 2       DOC00182-00 rev-B 
Package Content 
  WBSac-2450 access point  
  Wall Mount Base 
  Pole Mount Bracket 
  Pole mounting steel band 
  Wall mounting bots X 4 
  Mounting screws X 8 
  5GHz Omni antennas X 2 (for –O products only) 
  2.4GHz Omni antennas X 2 (for –O products only) 
  POE adapter 
  Grounding screw and cables 
Additional Equipment Required 
  Shielded Ethernet cable (outdoor shielded CAT5e/6 4-pair data cable, with RJ45 shielded plugs) 
Note: Maximum cable length: 100 meters 
  Lightning protection – use only the devices recommended by Alvarion 
  1”-2.5” diameter pole (on which to mount the unit in case of pole installation) 
  Tilting Kit (can be ordered separately when required) 
Important Information 
  Warnings 
  The WBSac access point must be used only with Alvarion-approved components and the antennas 
provided as part of the original package. 
  Only experienced installation professionals who are familiar with local building and safety codes and 
are licensed, wherever applicable, by the appropriate government regulatory authorities, should install 
outdoor units and antennas. This device requires Professional Installation for compliance with FCC 
Requirements. (Please refer to page 11 for Installation Instructions). 
  Modifying the operating frequency or enhancing the transmit output power through the use of external 
amplifiers or other equipment is illegal. 
 Note: Certain versions of this device (those with –US extension in their product name) comply 
with part 15 of the FCC Rules. In these cases, operation is subject to the following two conditions:  
  This device may not cause harmful interference 
  This device must accept any interference received, including such interference that may cause 
unrequired operating effects. 










