Specifications

Chapter 2 - Installation Installation Requirements
BreezeNET B 16 System Manual
2.1 Installation Requirements
This section describes all the supplies required to install the BreezeNET B system
components and the items included in each installation package.
2.1.1 Packing List (BU, RB)
 IDU indoor unit with a wall mounting kit
 Mains power cord
 ODU outdoor unit with an integrated antenna
Or
ODU outdoor unit with a connection to a detached antenna (not included)
 Pole mounting kit for the ODU
 An IDU to ODU cable kit, including 20m Category 5E Ethernet cable with a
shielded RJ-45 connector crimped on one end, a waterproof sealing assembly
and two shielded RJ-45 connectors (not applicable for BU/RB-B10).
2.1.1.1 Additional Installation Requirements
The following items are also required to install the BreezeNET B system:
 Detached Antenna* (for D model units), including a pole mounting kit and an
RF cable
 Ethernet cable (straight for connecting to a hub/switch etc., crossed for
connecting directly to a PC's NIC)
 For BU/RB-B10 (or for other units if the Indoor-to-Outdoor cable supplied
with the equipment is not long enough) - Category 5 Ethernet cable with
shielded RJ-45 connectors * (available in different lengths. For more details
refer to Section 2.1.2)
 Crimping tool for RJ-45 connectors
 Ground cables with an appropriate termination