User manual

Chapter 1 - Introduction General Notes
Alvarion BreezeNET B130/B300 GigE 3 Operational User Manual
1.1 General Notes
This manual lists the commands of the WANFleX operating system.
For device's management and configuration a Unix-like command line interface is
used. Every command is having power right after Enter key is pressed. However,
each command lifetime duration is limited within one configuration session. In
order to save a current configuration "config save" command is used.
Several commands can be grouped in one line using ";" character. If a
wrong-syntax line is met in the group, the rest of the string is checked anyway
and the wrong command is ignored. Command name can be shortened unless the
ambiguity occurs.
If your terminal supports VT100 or ANSI standard you can move around the list of
recently executed commands using cursor keys. Numbered list of these
commands can be reviewed by "!h" command. Any command from this list can be
available using "!<NUMBER>" command. TAB key performs substring search of
recently executed commands.
Ctrl/R combination refreshes the command string if its content was disturbed by
system messages.
The command executed with no arguments prints a short hint about its keys,
parameters and syntax.
Context help can be obtained by printing "?" in any position of the line.