User manual

Chapter 4 - Layer 3 Command Set - IP Networking ARDA
Alvarion BreezeNET B130/B300 GigE 140 Operational User Manual
ARDA(config)# route 10.1.2.3/24 eth0 5
4.6.6 Interface Management
To manage a specific interface in ARDA "interface" command in "configuration"
mode:
ARDA(config)# interface <INTERFACE NAME>
The following options are available for configuration:
 Bandwidth - sets bandwidth in Bits per second.
 Link-detect - enables automatic link detection
 Gateway - sets IP gateway address or device interface as IP gateway
 Show running-config - shows ARDA interfaces configuration
Examples:
ARDA(config-if)# bandwidth 100000
ARDA(config-if)# show running-config
4.6.7 Configuration View
To review ARDA configuration there are several commands in the basic mode of
CS:
show access-list
This command shows information about access lists.
show memory
This command shows information about memory usage.
show arda
This command shows current ARDA configuration
show route
This command lists route table