User manual

Chapter 2 - General Purpose Command Set System Command
Alvarion BreezeNET B130/B300 GigE 8 Operational User Manual
2.2 System Command
The command is used to review and update system parameters.
Syntax:
system [arguments]
Command arguments:
 system name [system_name]
Assigns to the system a new name specified by system_name parameter. If the
parameter is not specified, the current system name will be displayed.
Example:
system name revolution
 system location [string_describing_system_location]
Optional character string describing the system location; used in SNMP
protocol.
Example:
sys location On the Carlsson's rooftop
 system user user-name
Assigns a name under which the system administrator enters the device from
the console or remotely, using telnet/http.
Example:
system user root
 system password password
Sets the system administrator's password.
Example: