User manual

Chapter 4 - Layer 3 Command Set - IP Networking Loadm Command (Load Meter)
Alvarion BreezeNET B130/B300 GigE 188 Operational User Manual
4.10 Loadm Command (Load Meter)
This is a tool to perform the channel load monitoring
Syntax:
loadm [-B] [-l] [-m][-w delay] interface
Description:
This command allows estimating the load of a system interfaces specified by
interface parameter. By default, the information is displayed in one line and is
updated every second; the load is measured in Kbit/s.
The following additional keys change default settings:
 -B: display values in thousand of bytes per second;
 -l: display information line by line;
 -m: display results in Megabits per second;
 -w delay: specifies time interval between updates.
Example:
loadm -l rf5.0
The output example is shown below.