User manual

Chapter 4 - Layer 3 Command Set - IP Networking DHCP Server
Alvarion BreezeNET B130/B300 GigE 207 Operational User Manual
4.16 DHCP Server
4.16.1 DHCP Server Command Language
Commands used for configuration/review of current DHCP server state are
entered using console or Telnet. Prefix command for WANFleX command
interpreter is dhcpd.
Full command list (without prefix command):
Syntax:
add dscope <SCOPE_NAME> <INTERFACE|*> <START_IP> <END_IP>
add scope <SCOPE_NAME> <INTERFACE|*> <START_IP> <END_IP>
add virtual interface <GATEWAY>
clear
delete option <OPTION_NAME>
delete scope <SCOPE_NAME>
delete virtual interface <GATEWAY>
interface <INTERFACE> delete option <OPTION_NAME>
interface <INTERFACE> option <OPTION_NAME> <OPTION_VALUE>
interface <INTERFACE> reservation <CLIENT_ID> delete option
<OPTION_NAME>
interface <INTERFACE> reservation
<CLIENT_ID> option <OPTION_NAME> <OPTION_VALUE>
interface <INTERFACE|*> show boundhistory
interface <INTERFACE|*> show client <CLIENT_ID|*>
lock interface <INTERFACE>
notrace
option <OPTION_NAME> <OPTION_VALUE>
scope <SCOPE_NAME> add classid <CLIENT_CLASS_ID>
scope <SCOPE_NAME> add exclude <START_IP> <END_IP>
scope <SCOPE_NAME> add reservation <CLIENT_ID> <CLIENT_IP>
scope <SCOPE_NAME> delete classid <CLIENT_CLASS_ID>