User manual

Chapter 2 - General Purpose Command Set System Command
Alvarion BreezeNET B130/B300 GigE 10 Operational User Manual
Manages the system log operation. The optional ADDR parameter specifies the
UNIX host where the system log is located to which messages are directed
under the standard syslog protocol. The command has the following options:
» on - display messages on the current console
» off - stop displaying messages on the console
» "-" - disable logging on the remote host
» show - show the system log listing (the latest message displayed on the
bottom line; message time for every message expressed in
seconds/milliseconds back from the current time). Offset option shows the
log listing in the reversed order.
» clear - clear the system log
» [no]filter - this option removes neighboring identical lines from system log
leaving only one copy of each message and counts their recurrence
(enabled by default)
 system icmplimit XX
Sets a limit to the number of outgoing ICMP packets per second (200 by
default). Helps to avoid the device rebooting while network scanning programs
implementation. When set to 0 all limitations are turned off.
 system [no]sendredirects
Enables (disables) the system to send icmp redirect messages for the packets
source suppression if routing is incorrectly configured.
 system [no]dropredirects
Enables (disables) the system to send icmp redirect messages for routing
tables updating if routing is incorrectly configured.
 system cpu
Indicates current CPU load (in percent)