User manual

Chapter 4 - Layer 3 Command Set - IP Networking DHCP Server
Alvarion BreezeNET B130/B300 GigE 216 Operational User Manual
OK
Now eth0 interface is locked and it had all his scopes detached.
Interface can be unlocked:
Syntax:
dhcpd unlock interface <INTERFACE>
Example:
#2> dhcpd unlock interface eth0
[eth0] <192.168.177.12> (MSOFT):
192.168.177.20-192.168.177.22 Scope attached
[eth0] <192.168.177.12> (OTHER):
192.168.177.10-192.168.177.19 Scope attached
[eth0] <9.1.1.100> (PHONES):
9.1.1.151-9.1.1.200 Scope attached
OK
#2> dhcpd show interface *
>INTERFACES
[eth0] UP
<SUBNET> 9.1.1.100/255.255.255.0
<SCOPE> (PHONES) 9.1.1.151 - 9.1.1.200
<SUBNET> 192.168.177.12/255.255.255.0
<SCOPE> (OTHER) 192.168.177.10 - 192.168.177.19
<SCOPE> (MSOFT) 192.168.177.20 - 192.168.177.22
[vlan0] DOWN
<SUBNET> 192.168.178.1/255.255.255.0
OK
4.16.1.5 Scope reservation
The target of scope reservation is to reserve an IP-address for a specific client. The
command is the following:
Syntax: