User manual

Chapter 2 - General Purpose Command Set Config Command (Configuration Manipulations)
Alvarion BreezeNET B130/B300 GigE 12 Operational User Manual
2.4 Config Command (Configuration
Manipulations)
This command is used to view, save, export, and import the device configuration.
Syntax:
config [show | save | clear]
config import | export login:password@host/file
Description:
 show
Displays the current configuration of the system. Any change of the system
parameters may be immediately viewed using the config show command. The
optional parameter may contain a selection of WanFleX commands
(abbreviated to their initial letters), as shown in the following examples; only
those system parameters will then be displayed which relate to the commands
selected.
Example:
co show
 save
Saves the current system configuration in the device's flash memory for
subsequent permanent use. All modifications to the system parameters, if not
saved by this command, are valid only during the current session (until the
system reset).
 clear
Clears (resets to default) configuration in device flash. To take effect device
should be rebooted without saving the configuration.
 export, import
Saves the device configuration on a remote server and reloads it from a remote
server. The information is transferred using FTP. The name of the file to or