User manual

Chapter 2 - General Purpose Command Set Restart Command
Alvarion BreezeNET B130/B300 GigE 15 Operational User Manual
2.6 Restart Command
The command performs soft device reset.
Syntax:
restart [y]
restart SECONDS
restart stop
Description:
Full reset and reinitialization of a device. Equivalent to toggling the power switch
off and on. May be used to restore initial configuration after a number of
unsuccessful attempts to understand what exactly is done wrong, and after
loading a new version of software. With the "y" option, RESTART command is
executed immediately, without asking the operator for confirmation.
This command can be used for the postponed reinitialization (after certain
number of seconds, e.g. restart 300). This option can be useful in case of
dangerous manipulations with device's configuration when there is a risk to loose
control over the device. The system will periodically inform the user about the
time left to reinitialization by putting the corresponding message to the system
log. Repeated call of this command will start the countdown from the beginning.
Restart stop command will cancel a postponed reinitialization.