User manual

Chapter 2 - General Purpose Command Set Tracert Command
Alvarion BreezeNET B130/B300 GigE 18 Operational User Manual
2.9 Tracert Command
The command trace attainability of an IP-node.
Syntax:
tracert [-s SourceAddress] HostAddress
Description:
Traces the packet transmission path up to the IP node (host), specified by the
HostAddress parameter.
By default, the sending interface's address is put in the "source address" field of
the packets. Using the -s option, any other IP address (SourceAddress) may be
substituted for this default address.
Tracing is limited to a path with maximum 30 intermediate IP nodes. Trace
packets are 36 bytes long. The trace procedure makes 3 attempts for every
intermediate node.
Every trace result contains the IP-address of an intermediate node and the
response time (in milliseconds) of every attempt.