User manual

Chapter 2 - General Purpose Command Set Sflowagent (Sflow Agent)
Alvarion BreezeNET B130/B300 GigE 26 Operational User Manual
 sflow wi[pe] - stops Sflow agent and clears its configuration
 sflow add[instance] 'name' - adds statistics gathering component (if 'name'
parameter is not specified then 'ipstat' component will be used)
 sflow del[instance] 'name' - deletes statistics gathering component (if 'name'
parameter is not specified then 'ipstat' component will be used)
 sflow stat 'name' - shows statistics for a component (if 'name' parameter is
not specified then 'ipstat' component will be used)
Command output:
 sflow cl[earstat] 'name' - clears statistics for a component (if 'name'
parameter is not specified then 'ipstat' component will be used)
 sflow collector=IPaddress[:port] - sets address of a collector that process
sflow-packets. Default port is 6343.
Parameter Description
Total flow records Number or records delivered from Instance.
Total flow samples Number of grouped records delivered from flow records.
Overflow records Number of records in Instance for all cases when
Instance overflowed earlier then interval period had
ended.
Overflow count Number of times when Instance overflowed earlier then
interval period had ended.
Total cycles Overall number of gathering statistics success cycles.
Total datagrams Overall number of sent datagrams.
Unused datagrams Number of datagrams that could be created in compli-
ance with datagrams parameter but was not used.
Bytes sent Overall number of transmitted data by Sflow protocol.
Lost flow samples Number of flow samples that were discarded because of
maxpacket, interval and datagrams parameters low val-
ues.
Lost flow records Number of flow records that were discarded because of
maxpacket, interval and datagrams parameters low val-
ues.
Lost overflow
records
Number of times when Instance overflowed earlier than
the interval period ended and data were lost.