User manual

Chapter 2 - General Purpose Command Set Sntp Command
Alvarion BreezeNET B130/B300 GigE 31 Operational User Manual
Example:
sntp stop
Parameters:
The parameters can be set using any sequence with or without the command
itself.
 server
Using the server parameter, you can set the IP-address of your NTP server.
Example:
sntp -server=9.1.1.1
 interval
Using the interval parameter, one can set the time value (in seconds) defining
client's periodicity of NTP server requesting. 3600 by default.
Example:
console> sntp -interval=5000
 debug
This parameter enables/disables printing of debugging information (packets)
in the system log of WANFleX OS.
Example:
sntp -debug=on
sntp -debug=off