User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC Ltest (Radio Link Test)
Alvarion BreezeNET B130/B300 GigE 63 Operational User Manual
"ltest" output when using the "-align" parameter:
The difference of this output from the standard one is that "ant.amps" column is
used instead of "amp/max". "Ant.amps" column indicates signal levels from 0, 1
and 2 antennas divided by ":" correspondingly.
Figure 3-5: Ltest Output
Figure 3-6: Ltest Align Output