User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC Ltest (Radio Link Test)
Alvarion BreezeNET B130/B300 GigE 65 Operational User Manual
Packet size by default - 1536 bytes (to change packet size use "-s" option).
"Seconds" parameter allows setting test period (5 seconds by default). Maximum
value is 60 seconds.
-load N[m|k] option allows setting a limit on the maximal tested channel
bandwidth. By default, N parameter is measured in Megabits per second. If k
parameter is specified then in kilobits per second (for example, 10m - 10 Mbps,
500k - 500 Kbps).
"-mint" option allows performing "real-life" testing when all the traffic and link
parameters are controlled and managed by MINT functions such as ATPC and
autobitrate (in ordinary test ATPC and autobitrate are not used). In this mode the
statistics for errors and retries is not available.
This option is available only with -tu or -tb options. When using -mint option -r
option is ignored.
"Ltest" command output in Bandwidth meter mode:
Example:
lt rf5.0 00179AC2F3E6 -tb
This command starts bidirectional link bandwidth test of a local device with a
remote device which have "00179AC2F3E6" MAC-address.
Figure 3-7: Ltest Bandwidth Output