User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC Switch Command
Alvarion BreezeNET B130/B300 GigE 80 Operational User Manual
switch group ID order N
switch {group ID | interface IFNAME}
[ setpri|addpri prio ]
{deny | permit | showrules}
switch group GROUPID
[dump [interface] [WILDCARD]]
[dbdelete MACADDRESS]
{start | stop | remove}
switch group GROUPID in-trunk [{GROUPID|0}]
switch admin-group {GROUPID|0}
________ RULES commands _________________________________
switch {group GROUPID | interface IFNAME} rule NUMBER
[set NEWNUMBER] [not]
[src LIST] [dst LIST] [vlan LIST]
[iface LIST] [proto LIST] [match LIST]
[ setpri|addpri prio ]
[ deny | permit ] [ remove ]
_______ CONTROL commands _______________________________
switch resynchronize
switch local-tag TAG
switch trace { off | on | verbose }
switch stptrace { off | on }
switch {dump [WILDCARD]|MACADDRESS}
switch igmp-snooping dump [detail]
switch igmp-snooping lmqt Value
switch igmp-snooping gmi Value
switch igmp-snooping static-add MCAST IF_NAME [MAC]
switch igmp-snooping static-del MCAST IF_NAME [MAC]
switch igmp-snooping querier group N [source X] [mcast X]
[vlan N] {start|stop}