User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC Switch Command
Alvarion BreezeNET B130/B300 GigE 81 Operational User Manual
switch {start | stop | restart | destroy | dead-interval
DEAD_INTERVAL | strict-admin [(on|off)]}
switch statistics [(clear|help)]
switch maxsources (MAXSOURCES|0)
3.7.1 Wildcard Format
Wildcards are used in switch command to filter printed information. As a
difference from standard wildcards, in special cases the following characters can
be used:
 * - any number of any symbols (or empty).
 ~ - any symbol (just one).
Examples:
rf~.~
This filter includes the strings like rf5.0, rf5.1 etc.
#1> switch group 1 dump eth~
Bridge group 1(normal), READY STARTED Interfaces : eth0(F)
eth1(F) rf5.0(F)
Total records 5
DST MAC L Int. GateWay MAC GT Cost UsCNT
Dead HashC
========= = ==== ========= == === ===== ===== ==== =======
001111144693 eth0 000000000000 0 3987
300 1
000435018822 * eth0 000000000000 0 0
0 1
000435118822 * eth1 000000000000 0 0
0 1
This filter displays group statistics for all Ethernet interfaces.
3.7.2 List Configuration Commands
Syntax:
switch list LISTNAME [{iface | mac | numrange | match}]