User manual

Chapter 3 - Layer 2 Command Set - PHY and MAC Switch Command
Alvarion BreezeNET B130/B300 GigE 87 Operational User Manual
group number (in this case 10), tagged packets - with group numbers concurred
with VLAN ID.
switch list MYNET numrange add 100 200 300
switch group 20 vlan MYNET
switch group 20 trunk on
Group No20 handles only tagged packets from the MYNET list and transmits them
upgrading VLAN ID number to appropriate group (and vice versa).
switch list MYNET numrange add 100 200 300
switch group 30 vlan MYNET
switch group 30 trunk off
Group No30 handles only tagged packages from the MYNET list and transmits
them without changing with the group number 30.
switch group GROUPID info INFO_STRING
This command allows to add comments to switch group description.
switch group GROUPID setid NEWGROUPID
This command changes GROUPID of the switching group to NEWGROUPID.
Example:
switch group 3 setid 7
switch group GROUPID
[dump [interface] [WILDCARD]]
[dbdelete MACADDRESS]
{start | stop | remove}
Here:
 dump - prints the database of all known MAC-addresses
 interface - prints the database of all known MAC-addresses by grouping them
according to interfaces
 WILDCARD - the output will be filtered according to the WILDCARD criteria.
 dbdelete MACADDRESS - deletes all records from MAC-address database
connected with a specified MACADDRESS