Installation guide

BreezeNET
®
B130/B300 GigE Quick Installation Guide
- 10 -
P/N: 215743 July 2010
the connections that are situated outdoors. It is recommended to use either thermal shrinkage
with gel stuff or special waterproof tape.
Once the antenna alignment is not complete it is not recommended to perform sealing. This
prevents you to remove the sealing when there is a need to reallocate the antenna or the cable.
The isolation using the waterproof tape is performed by its winding with intersection around the
connection.
Please keep in mind the following recommendations: clean all the surfaces to be isolated and
keep them free from the dust and water, sealing material must cover the whole connector and
the cable with a gap of at least 2-3 cm from the connection place, sealing material must cover
the surfaces as tight as possible.
To protect the sealing material from the sun rays, it is recommended to cover it with
vinyl isolation tape.