Installation guide

BreezeNET
®
B130/B300 GigE Quick Installation Guide
- 4 -
P/N: 215743 July 2010
Connector installation
To install RJ-45 connector (without grounding)
for ODU:
1. Peel the STP Service cable removing a
small piece of its external jacket to free
the internal wires.
2. Put connector parts on the Service cable.
3. Attach RJ-45 connector to the Service
cable according to the “RJ-45” soldering
scheme and crimp the connector.
WARNING:
Please tightly crimp the RJ-
45 connector. Not crimped or
badly crimped connectors
damage the unit when
assembled into it which is not
considered as a warranty
case.
4. Assemble the connector.
WARNING:
Connect UTP-cable with
KEYED RJ-45 connectors
ONLY to “ODU” port on the
IDU. Do NOT try to connect it
to “LAN” port, it will damage
Keyed RJ-45 connector or
IDU’s port.
RJ-45 connector soldering scheme: