Specifications
Table Of Contents

Chapter 2 - Getting Access to the Unit PC/Laptop/LAN Connection
Alvarion BreezeNET B130/B300 GigE 15 Quick Start Guide
13 If all your settings are correct you can connect the unit to your LAN using UTP
cable with RJ-45 connectors (Ethernet port of the unit is located on IDU).
2.1.3 Accessing the Unit via Ethernet
If your PC/Laptop does not have a COM-port or you want to plug the unit to the
LAN switch you can configure it using Telnet protocol.
The default IP-address assigned to the eth0 interface of the unit is 10.10.10.1
with 255.255.255.0 mask.
If you connect the unit directly to the LAN/PC/Laptop you should either change
the IP-address on the Ethernet adaptor or create an alias IP-address which would
be located in 10.10.10.0/24 network.
Connect the unit to LAN/PC/Laptop using UTP cable with RJ-45 connectors.
The procedure is the following:
1 Open the Control Panel in Windows. See Figure 2-10.
Figure 2-9: Changing the IP Address on eth0 Interface