Specifications

Chapter 2 - Getting Access to the Unit Initial Setup
Alvarion BreezeNET B130/B300 GigE 22 Quick Start Guide
Information on the specific interface can be obtained using "ifc <IF-NAME>"
command. For example, "ifc rf5.0" will give you information on "rf5.0"
interface.
3 In order to get unit's capabilities including available frequency list, transmit
power levels, bitrates for the specific radio interface, "rf <IF-NAME> cap"
command is used. For example, "rf rf5.0 cap". See Figure 2-18.
Figure 2-17: Interfaces Information
Figure 2-18: Unit’s Capabilities