Specifications
Table Of Contents

Chapter 2 - Getting Access to the Unit Initial Setup
Alvarion BreezeNET B130/B300 GigE 23 Quick Start Guide
2.2.3 Radio Module Parameters Configuration
1 Power level changing is accomplished using "rf <IF-NAME> txpwr
<power-level>" command. For example, "rf rf5.0 txpwr 18" sets transmitting
power level to 18 dBm. Power level specified in the command should be the
one from the list of available power levels.
2 Frequency changing is accomplished using "rf <IF-NAME> freq <frequency>"
command. For example, "rf rf5.0 freq 5340" sets current working frequency
to 5340 MHz.
3 Bitrate can be changed using "rf rf5.0 bitr <bitrate>" command. For example,
"rf rf5.0 bitr 130000" sets current bitrate to 130 Mbps.