Specifications

Chapter 3 - Point-to-Point Configuration Learning Connection Status
Alvarion BreezeNET B130/B300 GigE 29 Quick Start Guide
For lower bitrates (equal or less than 52 Mbps) signal levels higher than 12-14
dB can be considered acceptable. For higher bitrates it is recommended to
have higher signal levels (>20 dB) in order to have a stable connection on this
bitrate and less retries and errors
3 Type of node: master or slave. In order to create PTP link, one unit should be
"master" and another one "slave". In this case a non-collision polling protocol
can be enabled on the "master" unit.