Specifications

Chapter 4 - Performing Outdoor Testing
Alvarion BreezeNET B130/B300 GigE 41 Quick Start Guide
In This Chapter:
 “Learning Link Status/Antenna Alignment Procedure” on page 42
Before carrying out outdoor testing make sure that the equipment is properly
configured and tested in the lab. If you use outdoor equipment please prepare
service cables to connect IDU and ODU and check them in the lab. Also the
following accessories may be very useful while outdoor testing:
1 Console cable to perform configuration on the rooftops/masts, etc
2 Binoculars to locate the opposite side (within reasonable range)
3 Mobile phones at either side to coordinate each others actions
4 Screwdrivers set
5 Soldering iron in case if you have to fix some problems with connectors.
6 Voltage analyzer to reveal cable problems if any
When planning your outdoor testing it is strongly recommended to perform
calculations using:
 Speed/Range Calculator
 Fade Margin Calculator
How-to-use instructions are located in the Technical User Manual on the CD
delivered with the equipment.