User`s guide

Installation
2-19
4. After connecting the outdoor unit to the indoor unit
using the Indoor-to-Outdoor cable, connect the power
cord to the unit’s AC socket, located on the bottom
panel shown in Figure 2-5. Connect the other end of the
power cord to the AC mains after verifying that the unit
is rated for the voltage in the country of use; the AC
rating is indicated on the bottom panel of the Indoor
unit.
NOTE:
The color codes of the power cable are:
Brown: phase ~
Blue: neutral 0
Yellow/Green: grounding
Figure 2-5: Indoor Unit Bottom Panel
5. Verify that the yellow POWER LED located on the top
panel is lit, indicating that the unit is supplying power
to the radio port.