User guide

5-14
BreezeNET DS.11b User’s Guide
Manual Version 1.0
display these values only for the infrastructure network to which you are
actually connected.
When the list of
Observed Networks does not show other networks, this means
that:
! Your Client Manager station has been configured with a specific Network
Name.
! This setting will not allow you to scan for/monitor other network
infrastructures. To do so, you will need to reconfigure your station to use
the Network Name “ANY”.
! There are no other networks operational in the vicinity of your Client
Manager station, or
! The neighboring networks have been “closed” to deny wireless compliant
devices to establish a radio connection when these devices have been
configured with:
" The network name “ANY”, or
" A zero-string SSID (the equivalent of the network name “ANY”).
For more information about “open” and “closed” networks, please consult
Security.
Log Settings Tab
You can record the Site Monitor measurement results to a log file, and use this
log file to more fully analyze the overall wireless coverage of your network. The
measurement data can be logged automatically at regular intervals or manually
upon user-command.
For more information on log files, see Logging Measurement Data.
AP Names Tab
The AP names tab enables you to create a user-defined list of Base Station
names associated with the MAC address of the wireless network interface(s) of
your Base Stations.
The field AP name in the Site Monitor window will display the value of the
System Name parameter that has been assigned to the Base Station upon
configuration
1
.
To display this name it is required that your computer first establishes true data
connections with such Base Stations. This means your computer did not yet:
! Walk around
! Use the
AP Names tab
1. To assign a system name to the Base Station, you will need the AP Manager program specify this name in
the “SNMP Parameters” window as pictured in Figure 8-41.