User guide

Monitoring Your BreezeNET Network
5-23
Alvarion
" 2 = PC Card slot A
" 3 = PC Card slot B
! The
Radio Type field identifies the type of PC Card (in the corresponding
slots):
" IEEE 802.11 for PC Cards
2. (Optional) To refresh the list, click the
Refresh button.
3. Select a station from the list and click the
Link Test button to display the
Remote Link Test window as pictured in Figure 5-20.
Figure 5-20: Remote Link Test window
Important Indicators to Monitor
The Signal to Noise Ratio (SNR) identifies the communication quality of the
radio path between the initiator station (i.e. the Base Station) and its remote
link test partner.
The color of the SNR indicator, the link quality indicator, and the remote levels
indicators relate to the following levels of communications quality:
NOTE:
Subject to the “Radio Type” of the wireless network interface that you selected, the lay-out
of the Remote Link Test windows may differ. The window pictured in Figure 5-20
represents the window for the wireless network interface.
Color Description
Green Communication quality is “Good”, no intervention is required.
Yellow Communication quality is “Marginal”, no intervention is required.
Red Communication quality is “Poor”, intervention required. (see Appendix B:
Troubleshooting on page B-1)
Blank No connection