User guide

5-24
BreezeNET DS.11b User’s Guide
Manual Version 1.0
If the level of SNR is lower than expected the signal and noise level indicators
may help you investigate the cause.
Click the
Details button to show the signal and noise level indicators.
! A low signal level indicates that the “strength” of the radio signal is fairly
low, i.e. the Base Station selected link test partner has moved “out-of-
range”.
! A high noise level indicates a source of radio interference in the radio path
between the Base Station and its link test partners.
Comparing the values for the Base Station and its link test partner will help
you to identify the location where the interference occurs, and investigate
whether any actions to eliminate or remedy the source interference
resulted in a better performance.
For more information about the Remote Link Test window please consult the
AP Manager on-line help documentation by clicking the
Help button or pressing
the function key on your keyboard.
Remote Statistics Tab
The remote statistics option allows you to monitor a set of SNMP variables for
each of the Base Station interfaces (both Ethernet and wireless).
Figure 5-21: Remote Statistics information
Starting Remote Statistics
To display remote statistics for the Base Station, you must first connect to the
target Base Station as described in Connecting to Base Stations.
F1