User`s guide

Planning and Installing Wireless LANS
BreezeNET PRO.11 Series
5-5
User’s Guide
5.1.1.5 Setting up a Single BreezeNET Cell
Figure 5-3. Single Cell Configuration
1. Install the Access Point (refer to Chapter 2 for installation instructions). Be sure
to position the Access Point as high as possible.
Note:
It is not necessary at this point to connect the
Access Point to an Ethernet
backbone, since Access Points continuously transmit signals (beacon frames)
whether they are connected to an Ethernet backbone or not.
2. Install a Station Adapter (refer to Chapter 2 for installation instructions) or
SA-PCR card (refer to Chapter 4 for installation instructions).