User`s guide

Appendix
BreezeNET PRO.11
9-3 User’s
Guide
Trap Variables Description
BrzWlanStatusOfStati
on
brzTrapToggle
brzTrapMacAddress
The quality of the wireless connection to the AP has
changed. An ON value is sent when the connection
goes lower than the predetermined threshold. An
OFF value is sent when the quality improves above
the threshold. The brzTrapMacAddress variable
contains the MAC address of the applicable station.
BrzGeneral brzTrapIndex
brzTrapText
For future use.
9.2 Technical Specifications
9.2.1 Specifications for BreezeNET PRO.11 Units
The following table provides the technical specifications for all products in the
BreezeNET PRO.11 series.
Technical Specifications AP-10 PRO. 11, SA-10/40 PRO. 11,
WB-10 PRO. 11
SA-PCR PRO.11
SA-PCD PRO.11
Wired LAN interface
Compliant with Ethernet / IEEE 802.3 CSMA/CD
standard
N/A
Physical Interface 10BaseT PC card type II /
PCMCIA 2.1
Network Operating Systems supported All Windows 95, 98, NT4
Network protocols supported All NDIS
Wireless LAN interface
Compliant with IEEE 802.11 CSMA / CA Wireless LAN standard
Physical interface – two antennas Integrated or External
Radio Specifications
Type Frequency Hopping Spread Spectrum (FHSS)
Frequency range 2.4 GHz – 2.4835 GHz (ISM band)
(different ranges available for countries using other bands)
Dwell time 32, 64, 128 ms
Transmitted power - integrated
antennas
Up to 100 mW (20dBm) EIRP