Alware Landing Gear for Phantom 1/ 2 Assembly Manual WWW.ALWARERC.
Check list All the package should be packed and contain all the items in as shown below. Please contact the vendor you purchased from if anything is missing at once. WWW.ALWARERC.
STEP1-1 Slide the Tee fitting into the thin tubing. WWW.ALWARERC.
STEP1-2 Put on screws 2pcs M2.5x10mm (Do not tighten yet). WWW.ALWARERC.
STEP2-1 Put on Carbon fiber Tube . WWW.ALWARERC.
STEP2-2 Tighten the screws WWW.ALWARERC.
Step3-1 Put on 2pcs Cap Screw M2.5 x 15mm & 2pcs Cap Screw M2.5 x 6mm WWW.ALWARERC.
Step3-2 Put on 4pcs Cap Screw M2.5 x 6mm WWW.ALWARERC.
Step3-2 Put on Carbon fiber Tube WWW.ALWARERC.
Step3-3 Tighten the 2pcs Cap Screw M2.5 x 15mm to secure the boom. WWW.ALWARERC.
Step4-1 Put on the Phantom Connection Plate and secure with 2pcs Cap Screw M2.5 x 8mm(Do not tighten yet). WWW.ALWARERC.
Step4-2 Put on the Supporting Plate and secure with the Phantom Connection Plate by tighten 2pcs Cap Screw M2.5 x 8mm. WWW.ALWARERC.
WWW.ALWARERC.
Step 5-1 Secure the Phantom Connection Plate to Phantom Body using 4pcs Cap Screw M3x 6mm WWW.ALWARERC.
Step5 Sub assembly WWW.ALWARERC.
Fully assembled WWW.ALWARERC.