Owner manual

Put the Inner Circle Assembly to the Outer Frame .

(Make sure the installation direction is correct. )

Make sure that Four Flange Bearings on the Outer

Frame is supporting the Inner Circle Assembly

tightly and correctly.

Put the 4pcs Outer Frame Rib to the Outer Frame.

Prepare the Landing Gear Ribs.

Assembly the Landing Gear Rib with Nylon parts.

(Parts No.: 10,12 for center; Parts No.: 11 for

Hexagonal Holes.)

Install the Landing Gear Rib with Frame as shown

above. (Installation direction should be the same

for both side.)