Owner manual

Mounting Instruction to DJI F450/ F550 Multicopters:

DJI Mounting Frame

*4pcs

Alu Rod M3x40mm

*4pcs

Hex Cap Screw

M3x12mm *4pcs

Hex Cap Screw

M3x8mm *4pcs

Install four Alu rod M3x40mm to the 3mm holes o

the Mounting Frame using 4pcs of Hex Cap Screw

M3x8mm. (Use the Red holes for F550

HexCopter, Green holes for F450 QuafCopter.)

Insert F450 / F550 Lower Main Frame in between

two pcs of DJI Mounting Frames and secure it

using 2pcs of Hex Cap Screw M3x12mm.(Repeat

this step by using another 2pcs of DJI Mounting

Frames.)

Final Assembly with F450 Lower Mounting Frame. Final Assembly with F550 Lower Mounting Frame.