Owner manual

Advanced upgraded benifits of V3:
* CNC main shaft metal mount.
* Operate with CNC fiber glass unique gears with better ratio for all axises which provide wider
movement angles.
* Larger room to hold bigger professional cameras (max. size 133*125mm(wide*height)).
* Pan-axis can be fixed easily if necessary to reduce the total weight.
* Larger 3-Dimension movement.
* Strengthen Camera Stand Frame.
* New Collapsible Landing Gear.
* Zero tolerance on the Roll mechanism design.
* Capable for GAUI 500X, Alware Spider 500 as well as DJI F425/550 Multicopters.
- Also suitable for 450-500 size Helicopters.
- With new, distinctive, professional, functional and underslung designed.
- Steered by 2-3 channels to pan(optional), tilt and roll the camera with fiber glass precise gears and
high tolerance metal shafts.
- Controlled by 3x ALware MD260 Metal Digital Servo 260 Degrees which is a wide angle and
powerful small size servo and is the best for camera mounts.
- Double ball bearings design for every movement joints which provides precise movement for all
axises.
- Operate with unique fiber glass gears which highly increase the performance and movement angle
of all axises.
- 2D(X & Y Axises) Spirit Level included, easy to set the level point.
- Made of flash, light and strong fiber glass plates as well as CNC Aluminum Metal Parts.
- Manufacture by precise CNC technology.
- Underslung mounting design which highly increase the stability of the aircraft in the sky due to lower
CG position.
- Relatively large room to mount varies cameras (Max. size 133*125mm(Wide*Height)).
- 95% Pre-assembled and tested by well trained Technicians, no worries about any of the installation
issue.
3