Service manual

Always On UPS Systems
M0704_NX_Series_Service_Manual V2.17 2012-06-12 34
14.12. Menu 11 – Data Time Setting Menu
MENU 11 is reached by selecting DATE/TIME on MENU 5.
This menu allows the user to set the YEAR, MONTH, DAY, HOUR, MINUTE and DAY OF
THE WEEK of the real time clock. The display upon selection is the current time and day
(factory preset). To change any to the variables move the cursor (→) to the correct
variable by pressing the UP (↑) and DOWN (↓) key, the ENTER (↵) key will confirm the
selection.
Below is a list of the available variables:
• YEAR : 1998 – 2097
• MONTH : 01-12
• DAY : 01 – 31(internal calendar will correct it if 31 is entered to a 30day month)
• HOUR : 0 – 23
• MINUTE : 0 - 59
• DAY OF THE WEEK : MON, TUE, WED, THU, FRI, SAT, SUN
The values (selected value is flashing) are increased by the UP (↑) key, and can be
decreased by the DOWN (↓) key and confirmed by the ENTER (↵) key.
If ‘EXIT’ is selected (blinking instead of pointed by cursor), the screen will go back to the
MENU 5- the PARAMETER SETTING menu.
14.13. Menu 12 – Other Setting Menu
This menu is for factory use only and is password protected.
DATE TI ME SETTI NG
YEAR =XXXX HOUR( 2 4H) =XX
MON T H= X X MI N UT E = X X
DAY=XX DAY OF THE WEEK=MON EXI T
O T H E R S E T T I N G
T I T L E :
A L WA Y S
O
N
U
P S S Y S T MS
G
E S
-
x x x
N
X 3 3
M O D E L : 5 0 3 3 A S I N : 1 2 3 4 5 6 7 8 9 0 I D : 0 0 E X I T
E
Figure 14.12.1
Data Time Settin
g
Menu Dis
p
la
y
Figure 14.13.1
Other Settin
g
Menu Dis
p
la
y