Specifications

EN
13
HOW TO SET THE TIME AND DATE
You can choose between 12 / 24-hour clock or month /
day, day / month display format.
NOTE At any stage of the setting sequence, if no entry
is made after 9 seconds, the unit will automatically exit the
Clock-Setting mode and return to the Clock Display Mode.
To set the time:
1. In Clock Display Mode, press and hold MODE for
2 seconds.
2. Select either the 12 / 24-hour format. Press
or
to switch between the 2 formats.
3. Make selection then press MODE to save and
advance to the next step.
4. To enter the hour digits, press
or until the hour
digits have been selected.
NOTE Pressing and holding
or will advance digits
in rapid sequence.
5. When the hour has been selected, press MODE to
save and advance to the minute setting mode.
Press
or to make the minutes selection.
6. Press MODE to save the minutes selection and
advance to setting the day-of-the-week language.
Press
or to make the language selection in
English, French or Spanish.
7. When the weekday language has been selected,
press MODE to save and advance to setting the year.
Press
or to select the year.
8. Press MODE to save the selected year and advance to
setting the month. Press
or to select the month.
9. When the month has been selected, press MODE to
save and advance to select the day of the month.
Press or to select the day of the month.
When the day of the month has been selected,
press MODE to save and advance to select the
display option of day-month (D/M) format or month-
day(M/D) format. Press
or to switch between
these 2 display options.
10. Press MODE or wait 9 seconds to exit the Clock-
Setting Mode and return to the time display.
HOW TO SET THE ALARMS
The WR103NX has 2 alarms (alarm 1 and alarm 2). They
can be used together or independently. The alarm icons
are only displayed when alarm 1 or alarm 2 are active.
No icon(s) indicate that the alarm(s) have not been set.