User manual

Always “On” UPS Systems Inc.
1 Version 2.2
1. INTRODUCTION
The V-Series is a Line Interactive UPS system that includes the newest and latest
technology enhancements. The Line Interactive technology with AVR function (on-
line voltage boost-up & buck-down) allows for a wide input voltage range of 90 to
150VAC. The V-Series UPS is ideal protection for microprocessor control loads.
After the UPS has been turned “On” it will protect the load from transients, spikes
and other power aberrations. In the event of a blackout (or severe brownout) the UPS
will automatically switch to back-up mode and maintain power to the load until the
software shuts down the system or when the battery reaches a low voltage state. Also
included with our UPS systems is a cyclic self-testing function to verify both the
operation of the UPS and the condition of the battery.
In addition, the V-Series UPS provides advanced telephone line and Ethernet
surge suppression through the modular connectors on the back panel.
The Line Interactive UPS in conjunction with our monitoring software makes
your UPS operate intelligently and provides you with total protection for all
your loads.
Interference to Radio / TV
If this UPS causes interference to radio or television reception, which can be
determined by turning the UPS off and on, the user can attempt to correct the
interference by one or more of following measures:
1. Connect the equipment to an outlet on a circuit different from the one that
the receiver is connected.
2. Increase the separation between the equipment and the receiver.
3. Re-orientate the receiving antenna.