Service manual

Always On UPS Systems Inc

14.2. Menu 1 – Select Menu

MENU 1 is reached by pressing any button on the opening screen and is also the default menu.

From this menu the personnel can select STATUS WARNING FAULT (MENU 2 – Section 10.3),

REAL TIME DATA (MENU 3 – Section 10.4), HISTORICAL DATA (MENU 4 – Section 10.5)

and PARAMETER SET (MENU 5 – Section 10.6). To select an option move the cursor (→) by

pressing the UP (↑) key, or the DOWN(↓) key. Selections are confirmed by pressing the ENTER

(↵) key. The user will be sent to the menu the cursor is pointing to. If the item ‘PARAMETER

SET’ is selected, the LCD will jump into a screen that will prompt the user for a password. See the

figure below.

The numbers are changed by pressing the UP (↑) or the DOWN(↓) key respectively and is

confirmed by the ENTER(↵) key. When the four-digit password has been entered successfully you

will proceed to the selected area. If the password has been entered incorrectly three times the

display will revert to the default menu (MENU 0).

The password for entering the < PARAMETER SET > menu is 1-2-3-4. To change the password,

please review MENU 12 (Section 10.13).

To return to MENU 0 select the ‘EXIT’ option (blinking instead of pointed by cursor).

SELECT MENU

STATUS WARN I NG FAULT PARAMETER SET

REAL TI ME DATA

HI STORI CAL DATA EXI T

PASSWORD: 1234

Figure 14.2.1

Select Menu Dis

Figure 14.2.1

Password Menu Dis