Service manual

Always On UPS Systems Inc

14.6. Menu 5 – Parameter Setting Menu

MENU 5 is reached by selecting PARAMETER SET on MENU 1 and access is only allowed if the

correct password is entered. The cursor (→) is used to select which parameter the user would like to

edit, such as INVERTER ON/OFF, BUZZER ON/OFF, BOOST CHARGE, DATE/TIME. To

select one of the different menu options move the cursor(→) until it is pointing at the correct

selection, by press the UP (↑) key or the DOWN (↓) key. To confirm and select the menu option

press the ENTER (↵) key.

The INVERTER ON/OFF option allows the user to activate or deactivate the inverter. When

selected the blinking display (ON or OFF) indicates the current status of the inverter. To change the

state of the inverter press the UP (↑) or the DOWN (↓) key and confirm selection by pressing the

ENTER (↵) key. ‘INVERTER = ON’ will be displayed if ‘ON’ is selected or ‘INVERTER = OFF’

will be displayed if ‘OFF’ is selected.

To control the state of the buzzer select the BUZZER ON/OFF option. Again the current status of

the buzzer is indicated by the blinking ON or OFF. To change the state of the buzzer press the UP

(↑) or the DOWN (↓) key and confirm selection by pressing the ENTER (↵) key. ‘BUZZER = ON’

will be displayed if ‘ON’ is selected or ‘BUZZER = OFF’ will be displayed if ‘OFF’ is selected.

Selecting the BOOST CHARGE option will bring you to MENU 10 (Section 10.11).

Selecting the DATE/TIME option will bring you to MENU 11 (Section 10.12).

Selecting the ‘EXIT’ option (blinking instead of pointed by cursor) will return you to MENU 1.

PARAMETER SETTI NG

I NVERTER=ON/ OFF DATE T IME

BUZZER=ON/ OFF

BOOST CHARGE EXI T

Figure 14.6.1

Parameter Settin

Menu Dis