Service manual

Always On UPS Systems Inc
31
14.9. Menu 8 – Output Data Menu
MENU 8 is reached by selecting OUTPUT DATA on MENU 3. The information provided on
this menu is the real time readings of the inverter or reserve output (depending on what mode
the system is in); OUTPUT FREQUENCY, LOAD % OF R/S/T, OUTPUT R-N/S-N/T-N
VOLTAGE for wye (Y) configured systems or R- S/S-T/T-R VOLTAGE on delta ()
configured systems.
The UP (↑) or DOWN (↓) key has no function in this menu. The screen will return to MENU 3
when the ENTER (↵) key is pressed.
14.10. Menu 9 – Other Data Menu
MENU 9 is reached by selecting OTHER DATA on MENU 3. The information provided on
this menu is the real time readings of the UPS system; TEMPERATURE, DC VOLTAGE,
CHARGE OR DISCHARGE CURRENT.
When the UPS system is operating in normal mode the last line on MENU 9 will read
CHARGE CURRENT and will represent the amount of current being supplied to the batteries.
When the system changes to back-up mode the last line will change to DISCHARGE
CURRENT displaying how much current is being supplied to the inverter from the batteries
(figure below).
The UP (↑) or DOWN (↓) key has no function in this menu. The screen will return to MENU 3
when the ENTER (↵) key is pressed.
OT HER DAT A
TEMPERATURE=XX C
DC VOLTAGE=XXX Vdc
DI SCHARGE CURRENT=XXXA
OT HER DAT A
TEMPERATURE=XX C
DC VOLTAGE=XXX Vdc
CHARGE CURRENT=XXXA
OUTPUT DATA
OUTPUT FREQUENCY= XX HZ
LOAD: R=XXX % S=XXX % T=XXX %
R- N=XXX Vac S- N=XXX Vac T- N=XXX Vac
Figure 14.9.1
Out
p
ut Data Menu Dis
p
la
y
Figure 14.10.1
Other Data Menu Dis
p
la
y
Figure 14.10.2
Other Data Menu Dis
p
la
y
when s
y
stem in Back-u
p