Specifications

Always On UPS Systems
h. Avoid accumulating litter or trash of any sort in or around the bypass system. The floor area
surrounding the bypass should be kept clean, free from metallic powder and/or filings.
i. Access to the bypass room should be limited to operation and maintenance personnel. The
doors should be kept locked and the keys should be available only to authorized personnel.
j. Personnel who operate or maintain the bypass system should be proficient in normal and
emergency operational procedures. New personnel should be trained and qualified prior to
operation of the equipment.
3.5. Unpacking
Once in room of final destination, carefully remove all the packaging material from the bypass
and place the bypass in its final position.
This bypass system has passed all stages of production testing and final QC testing prior to
shipment from the factory (report enclosed). The bypass should be in full operating condition
upon receipt. Upon receiving visually check the bypass for any physical damage that may
have occurred during transport. If damage is noticed file a damage report immediately with the
transport company and inform Always On directly. Also check to ensure all of the accessories
and/or options ordered are received.
• DOOR KEY
• MANUAL OVER-RIDE SWITCH KEY (if equipped)
• OPERATOR’S MANUAL
Check and verify the specifications of the bypass are identical to the specifications of the
system ordered. The key items in the specifications you must check are:
• RATED POWER OF THE BYPASS
• INPUT VOLTAGE & FREQUENCY
• OUTPUT VOLTAGE & FREQUENCY
10