Specifications

Always On UPS Systems
8
3. UNPACKING
3.1. Transport
The bypass is packaged on a pallet, suitable for handling with a forklift.
Pay strict attention to the center of gravity. The bypass must be moved in upright position. Do
not tilt cabinets more than +/- 10° during handling.
Move the bypass in its original package to the final destination site.
Do not stack other packages on top.
If the bypass must be lifted by crane, use suitable lifting straps and spreader bars.
3.2. Delivery
Upon receiving the bypass system, inspect the packaging integrity and the physical condition of
the cabinets carefully.
In the event that physical damage is visible, the carrier must be informed immediately and a
claim filed with them. Inform Always On as soon as the claim has been filed and a copy of claim
should be faxed to Always On at [phone].
A detailed report of the damage is necessary for carrier insurance claim.
WARNING
A damaged bypass system must never be installed or connected to the utility or batteries
without written instruction from Always On Engineering.
3.3. Storage
STORAGE OF THE BYPASS
The bypass is carefully packed for transport and storage.
Never leave a bypass outside the building exposed to the elements and do not place other
packages on the top of the bypass.
Storing: It is recommended to store the bypass in its original package in a dry, dust-free room,
away from chemical substances, and with a temperature range of -25°C (-13°F) to 55°C
(131°F). Exceeding this temperature range may cause damage.