User manual

18 Options (sold separately)
−138−
18 Options (sold separately)

Motor cable set
The cable supplied with the NX series is all you need to connect the motor and driver.
Take note, however, that if you wish to connect the motor and driver over a distance of 3 m (9.8 ft.) or more,
the supplied cable is not long enough and you must use a connection cable set or extension cable set.
When installing the motor on a moving part, use a flexible cable offering excellent flexibility.
• System configuration
Extending the wiring length using a connection cable set
Do not use the supplied cable.
For encoder
For electromagnetic brake
∗
For motor
∗ Only when the motor is of electromagnetic brake type.
Extending the wiring length using an extension cable set
Connect an extension cable to the supplied cable.
For motor
For electromagnetic brake
∗
Cable for motor (supplied)
For encoder
Cable for encoder (supplied)
Cable for electromagnetic brake
(supplied)
∗
Extension cable set
∗ Only when the motor is of electromagnetic brake type.
Note
When extending the wiring length by connecting an extension cable to the supplied cable,
keep the total cable length to 20 m (65.6 ft.) or less.